| ■ |
Product profile |
 |
| This vehicle sensor is installed on the floor or ground at the rear of a parking space, and uses reflected ultrasonic waves to determine whether a vehicle is present. |
| ■ |
Advantages |
| Suitable for level outdoor and rooftop parking facilities |
| This uniquely designed sensor in its splash-proof casing is fitted to the floor or ground, and so can be easily installed even where there are no poles or ceilings. |
| Installable in existing parking facilities |
| The sensor is anchored or glued to the floor or ground, making it unnecessary to excavate into the asphalt. The sensor is in addition wired up by a special buried cable that can be laid in a groove measuring just 3mm in width and 30mm in depth. |
| ■ |
Connection method |
| The EP-I is easily connected up by a four-core cable with a special waterproof connector. |
| Four-core cable input |
| Wire color |
Details |
| Brown |
Power source input (DC 12V input and preset) |
| White |
Signal output (in detection mode: low) |
| Black |
GND (connected on minus side of power supply) |
| Blue |
Signal input (synchronous signal input) |
 |
| Sensor specifications |
| Sensor type |
Splash-proof 40kHz ultrasound sensor |
| Detection method |
Ultrasound echo (detection signal outputted from sensor controller) |
| Detection distance |
1-5m (actual distance of detection can be changed according to the controller settings) |
| Maximum number of units in line |
31 (2 line output from sensor controller) |
| Supply voltage |
DC 12V (supplied from sensor controller) |
| Power consumption |
Up to 10mW |
| Guaranteed temperature range |
-20℃ to +60℃ |
| Operating location |
Outdoors and rooftops (flat asphalt or concrete surface) |
